Technical Data

• Stroke3.175 mm ... 101.6 mm
• Piston diameter1 1/16"
• Piston rod thread5/16-24 UNF-2B 5/16-24 UNF-2A 5/16-18 UNC-2B 5/16-18 UNC-2A
• CushioningNo cushioning Elastic cushioning rings/pads at both ends Elastic cushioning rings/plates, at front Elastic cushioning rings/plates, at rear
• Mounting positionAny
• Mode of operationDouble-acting Pushing Single-acting Pulling
• Piston rod endExternal thread Internal thread No thread
• Structural designPiston Piston rod Cylinder barrel
• Position sensingFor proximity sensor
• VariantsExtended piston rod Square lid shape Low friction Through piston rod Through, hollow piston rod Temperature range -40 to 80°C Reinforced end cap
• Protection against torsion/guideDouble piston rod with end plate Double piston rod with end plate, rotated 90° Double piston rod with end plate with recess and through-hole Double piston rod with end plate with recess and through-hole rotated 90°
• Operating pressure1.034 bar ... 10.342 bar
• Operating mediumCompressed air as per ISO 8573-1:2010 [7:4:4]
• Information on operating and pilot mediaOperation with oil lubrication possible (required for further use)
• LABS (PWIS) conformityVDMA24364 zone III
• Ambient temperature-32 °C ... 105 °C
• Product weight2131.882 g ... 2544.651 g
• Type of mountingwith swiveling rod eye on end cap rotated 90° with swiveling rod eye on end cap with through-hole on end cap with through-hole on bearing cap with through-hole on both sides with threaded flange on bearing cap with trunnion mounting on end cap with trunnion mounting on bearing cap With accessories
• Pneumatic connectionInternal thread 1/8 NPT
• Note on materialsRoHS-compliant
• Cover materialWrought aluminum alloy
• Material of dynamic sealsFPM NBR
• Piston rod materialhigh-alloy stainless steel, hard chrome plated
• Material of cylinder barrelWrought aluminum alloy