Technical Data

• Dimensions (W x L x H)30 x 102.5 x 35 mm
• Type of mountingWith through-hole
• Product weight81 g
• Ambient temperature-20 °C ... 60 °C
• Storage temperature-40 °C ... 70 °C
• Relative air humidity5 - 95% Non-condensing
• Degree of protectionIP65 IP67
• Note on degree of protectionUnused connections sealed
• Corrosion resistance class CRC1 - Low corrosion stress
• Max. cable length30 m inputs 50 m system communication
• LABS (PWIS) conformityVDMA24364-B2-L
• Cleanroom suitability, measured according to ISO 14644-14Element installed statically, no meaningful evaluation possible according to ISO 14644-1
• CE mark (see declaration of conformity)To EU EMC Directive
• UKCA marking (see declaration of conformity)To UK instructions for EMC
• KC markKC-EMV
• ApprovalRCM trademark c UL us listed (OL)
• Certificate issuing authorityUL E239998
• Note on materialsRoHS-compliant
• Material housingPC Die-cast zinc, nickel-plated
• Material sealsNBR
• Material o-ringFPM
• Diagnostics via LEDDiagnostics per module Status per channel
• Diagnostics per internal communicationShort circuit/overload in sensor supply Electronics/sensors overvoltage Electronics/sensors undervoltage
• Communication interface, functionSystem communication XF10 IN
• Communication interface, connection typeSocket
• Communication interface, connection technologyM8x1, D-coded according to EN 61076-2-114
• Communication interface, number of pins/cores4
• Communication interface, protocolAP
• Communication interface, screenedyes
• Power supply, functionIncoming electronics/sensors and load
• Power supply, connection typePlugs
• power supply, connection systemM8x1, A-coded to EN 61076-2-104
• Power supply, number of pins/wires4
• Note regarding operating voltageSELV/PELV fixed power supplies required Note voltage drop
• Nominal DC operating voltage, electronics/sensors24 V
• Permissible voltage fluctuations for electronics/sensors± 25%
• Max. power supply2 x 4 A (external fuse required)
• Intrinsic current consumption at nominal operating voltage for electronics/sensorsTypically 32 mA
• Power failure bridging10 ms
• Reverse polarity protectionyes
• Electrical connection input, functionDigital input
• Electrical connection input, connection type4x socket
• Electrical connection input, connector systemM8x1, A-coded to EN 61076-2-104
• Electrical connection input, number of connections/cores3
• Number of inputs4
• Characteristic for inputsTo IEC 61131-2, type 3
• Switching levelSignal 0: <= 5 V Signal 1: >= 11 V
• Switching logic for inputsPNP (positive switching) 2-wire sensors to IEC 61131-2 3-wire sensors to IEC 61131-2
• Input debounce time0.1 ms 3 ms 10 ms 20 ms
• Fuse protection of inputs (short circuit)Internal electronic fuse per module
• Max. residual current of inputs per module0.8 A
• Electrical isolation of inputs between channelsno
• Electrical isolation of inputs between channel – internal communicationyes